Table of contents
Study on the calculation method of the maximum number of bonded steel plates at the bottom of reinforced concrete beams
Lifeng Wang, Fei Yu, Ziwang Xiao, Qi WangWhen the reinforced concrete beams are reinforced by bonding steel plates to the bottom, excessive use of steel plates will make the reinforced concrete beams become…
Seismic behaviour of the non-straight steel beams in the structural plans
Farshid Rashidiyan, Seyed Rasoul Mirghaderi, Saeed Mohebbi, Sina KaveiThis research study focuses on investigating the seismic performance of non-straight beams in steel structures and exploring the mechanism by which plastic hinges are formed…
Research on fatigue curve fitting methods based on the notch stress approach
Shengfu Xue, Zhengping He, Bingzhi Chen, Jianxin XuThis study investigates the fitting techniques for notch fatigue curves, seeking a more reliable method to predict the lifespan of welded structures.
Evaluation of the strain response of FRP partially confined concrete using FEM and DIC testing
Yunfei ZouThis study aims to enhance the understanding of fiber-reinforced polymer (FRP) applications in partially confined concrete, with a specific focus on improving economic value and…
Influence of pre-existing cracks and concrete cover on service life of reinforced concrete and mechanical behaviour of corroded rebars
Kuleni Fekadu Yadeta, Sudath C. Siriwardane, Tesfaye Alemu Mohammed, Hirpa G. LemuIncorporating pre-existing crack in service life prediction of reinforced concrete structures subjected to corrosion is crucial for accurate assessment, realistic modelling and…
Free vibration characteristics of elastic foundation-supported porous functionally graded nanoplates using Rayleigh-Ritz approach
Azmeera Sudheer Kumar, Subodh Kumar, Prashant Kumar Choudhary, Ankit Gupta, Ashish NarayanThe purpose is to explore the free vibration behaviour of elastic foundation-supported porous functionally graded nanoplates using the Rayleigh-Ritz approach. The goal of this…
The influence of CMT-MAG and MAG welding-processes on microstructure and mechanical behaviour of C-Mn E410 structural-steels
Akhil Khajuria, Anurag Misra, S. ShivaAn experimental investigation for developing structure-property correlations of hot-rolled E410 steels with different carbon contents, i.e. 0.04wt.%C and 0.17wt.%C metal active…
A method for modifying octagonal Goodman–Smith fatigue limit diagram
Yuhan Tang, Yuedong Wang, Jiayu Liu, Boya Tian, Qi Dong, Ziwei He, Jiayi WenIn order to extend the application of the original octagonal Goodman–Smith fatigue limit diagram, which is commonly used for the evaluation of structure fatigue stress in…
Investigation into the interface bond between polyurethane concrete and steel plate
Yuxuan Wu, Wenyuan Xu, Tianlai Yu, Yifan WangPolyurethane concrete (PUC), as a new type of steel bridge deck paving material, the bond-slip pattern at the interface with the steel plate is not yet clear. In this study, the…
Ultra-high cycle fatigue and ultra-slow crack growth behavior of additively manufactured AlSi7Mg alloy
Qiuchen Zhao, Xue Li, Junchao Hu, Yuehui Jiang, Kun Yang, Qingyuan WangThe purpose of this paper is to determine the ultra-high cycle fatigue behavior and ultra-slow crack propagation behavior of selective laser melting (SLM) AlSi7Mg alloy under…
ISSN:
1757-9864Online date, start – end:
2010Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr. José A.F.O. Correia
- Prof. Shun-Peng Zhu