To read this content please select one of the options below:

Research on improved active disturbance rejection control strategy for hydraulic-driven Stewart stabilization platform

Xingyu Qu (School of Electrical Engineering, Shenyang University of Technology, Shenyang, China)
Zhenyang Li (School of Electrical Engineering, Shenyang University of Technology, Shenyang, China)
Qilong Chen (School of Electrical Engineering, Shenyang University of Technology, Shenyang, China)
Chengkun Peng (School of Electrical Engineering, Shenyang University of Technology, Shenyang, China)
Qinghe Wang (School of Electrical Engineering, Shenyang University of Technology, Shenyang, China)

Industrial Robot

ISSN: 0143-991x

Article publication date: 16 May 2024

35

Abstract

Purpose

In response to the severe lag in tracking the response of the Stewart stability platform after adding overload, as well as the impact of nonlinear factors such as load and friction on stability accuracy, a new error attenuation function and a parallel stable platform active disturbance rejection control (ADRC) strategy combining cascade extended state observer (ESO) are proposed.

Design/methodology/approach

First, through kinematic modeling of the Stewart platform, the relationship between the desired pose and the control quantities of the six hydraulic cylinders is obtained. Then, a linear nonlinear disturbance observer was established to observe noise and load, to enhance the system’s anti-interference ability. Finally, verification was conducted through simulation.

Findings

Finally, stability analysis was conducted on the cascaded observer. Experiments were carried out on a parallel stable platform with six degrees of freedom involving rotation and translation. In comparison to traditional PID and ADRC control methods, the proposed control strategy not only endows the stable platform with strong antiload disturbance capability but also exhibits faster response speed and higher stability accuracy.

Originality/value

A new error attenuation function is designed to address the lack of smoothness at d in the error attenuation function of the ADRC controller, reducing the system ripple caused by it. Finally, a combination of linear and nonlinear ESOs is introduced to enhance the system's response speed and its ability to observe noise and load disturbances. Stability analysis of the cascade observer is carried out, and experiments are conducted on a six-degree-of-freedom parallel stable platform with both rotational and translational motion.

Keywords

Citation

Qu, X., Li, Z., Chen, Q., Peng, C. and Wang, Q. (2024), "Research on improved active disturbance rejection control strategy for hydraulic-driven Stewart stabilization platform", Industrial Robot, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/IR-03-2024-0086

Publisher

:

Emerald Publishing Limited

Copyright © 2024, Emerald Publishing Limited

Related articles